Campbell Scientific CR800 Measurument & Control Data Logger 工作温度范围 • -25° 至 +50°C（标准） • 非冷凝环境 最大扫描速率 100 Hz 模拟输入 6个单端或3个差分（单独配置） 脉冲计数器 2 电压激励端子 2 (VX1, VX2) 通信端口 • CS I/O • RS-232 12伏开关 1个端子 数字I/O • 部分数字端口可用于计数开关闭合。 • 4个I/O或2个RS-232 COM I/O端口可配置为发射器和接收器，用于测量智能串行传感器。 输入限制 ±5V 模拟...
78
产品信息总数
0.0
评分
0
条评价
工作温度范围
• -25° 至 +50°C（标准）
• 非冷凝环境
最大扫描速率
100 Hz
模拟输入
6个单端或3个差分（单独配置）
脉冲计数器
2
电压激励端子
2 (VX1, VX2)
通信端口
• CS I/O
• RS-232
12伏开关
1个端子
数字I/O
• 部分数字端口可用于计数开关闭合。
• 4个I/O或2个RS-232 COM I/O端口可配置为发射器和接收器，用于测量智能串行传感器。
输入限制
±5V
模拟电压精度
0°至40°C时 ±(0.06% 读数 + 偏移)
ADC
13位
电源要求
9.6至16 Vdc
实时时钟精度
每年 ±3 分钟（GPS校正可选）
互联网协议
FTP, HTTP, XML POP3, SMTP, Telnet, NTCIP, NTP
通信协议
PakBus, Modbus, DNP3, SDI-12, SDM
空闲电流消耗，
平均 0.7 mA (@ 12 Vdc)
平均有源电流消耗
• 1 mA（1 Hz采样率 @ 12 Vdc，无RS-232通信）
• 16 mA（100 Hz采样率 @ 12 Vdc，无RS-232通信）
• 28 mA（100 Hz采样率 @ 12 Vdc，有RS-232通信）
尺寸
24.1 x 10.4 x 5.1 cm (9.5 x 4.1 x 2 英寸)
重量
0.7 kg (1.5 lb)
| Operating Temperature Range | • -25° to +50°C (standard)• Non-condensing environment | Maximum Scan Rate | 100 Hz | Analog Inputs | 6 single-ended or 3 differential (individually configurable) | Pulse Counters | 2 | Excitation Voltage Terminals | 2 (VX1, VX2) | Communication Ports | • CS I/O• RS-232 | 12 Volt Switched | 1 terminal | Digital I/O | • Some digital ports can be used to count switch closures.• 4 I/O or 2 RS-232 COM I/O ports can be configured as transmitters and receivers for smart serial sensors. | Input Limits | ±5V | Analog Voltage Accuracy | ±(0.06% of reading + offset) from 0° to 40°C | ADC | 13-bit | Power Requirements | 9.6 to 16 Vdc | Real-Time Clock Accuracy | ±3 min/year (GPS correction optional) | Internet Protocols | FTP, HTTP, XML, POP3, SMTP, Telnet, NTCIP, NTP | Communication Protocols | PakBus, Modbus, DNP3, SDI-12, SDM | Idle Current Consumption | Average 0.7 mA (@ 12 Vdc) | Active Current Drain, Average | • 1 mA (1 Hz sample rate @ 12 Vdc, without RS-232 communication) • 16 mA (100 Hz sample rate @ 12 Vdc, without RS-232 communication) • 28 mA (100 Hz sample rate @ 12 Vdc, with RS-232 communication) | Dimensions | 24.1 x 10.4 x 5.1 cm (9.5 x 4.1 x 2 in) | Weight | 0.7 kg (1.5 lb) |
KALENDER MAKİNE OTOMASYON SAN. 自1985年以来积累的经验和知识，于2005年成立。和 TİCARET. LTD. ŞTİ. 为业务至关重要的气动隔膜泵、燃烧器、热油和蒸汽锅炉以及液压和气动系统提供备件供应、销售、维修和保养。我在行业内提供的服务如下。
• SAFE NANOTECH 游艇涂料 / 土耳其代表• Leyla 主机预热器制造商• 针对流体的定制改性泵制造• 隔膜泵制造/销售/服务• 燃烧器维护/维修我们提供维护和维修的隔膜泵： RAN, DIA, EPA, ARO, DEPA, POMKAR, DEBEM, GRACO, HUSKY, TAPFLO, WILDEN, ALL-FLO, YAMADA, SERFILCO, BLAGDON, SAND PIPER, WERDER AIR, WARREN RUPP, WERSAMATIC, ALPHA DIYNAMIC, ATLAS COPHCO我们维修的重型泵； AZCUE PUMPS 海水泵, BORNEMANN PUMPS 燃油泵, DRAGFLOW PUMPS 砂、砾石、泥浆泵, SUNTEC PUMPS 燃烧器重油泵, ALLWEILER PUMPS 导热油泵。
我们可以提供上述产品和服务，包括船上服务。如果您希望就此处未包含的更多详细信息和相关问题利用我们的专业知识，请与我们联系。 +90 545 734 12 63 图兹拉 / 伊斯坦布尔 / 土耳其
KALENDER MAKINE AUTOMATION SAN. It was established in 2005 with the increasing experience and knowledge accumulated since 1985. and TRADE. LTD. ŞTİ. It supplies, sells, repairs and maintains spare parts for air diaphragm pumps, burners, hot oil and steam boilers, and hydraulic and pneumatic systems, which are vital for a business.The services I offer within the sector are as follows.
• SAFE NANOTECH Yacht Paints / Türkiye Representative• Leyla Main Machine Preheater manufacturer• Manufacturing of modified pumps specific to fluids• Diaphragm pump manufacturing / sales / service• Burner maintenance / repair
Diaphragm pumps that provide maintenance and repair: RAN, DIA, EPA, ARO, DEPA, POMKAR, DEBEM, GRACO, HUSKY, TAPFLO, WILDEN, ALL-FLO, YAMADA, SERFILCO, BLAGDON, SAND PIPER, WERDER AIR, WARREN RUPP, WERSAMATIC, ALPHA DIYNAMIC, ATLAS COPHCO
Heavy duty pumps we repair; AZCUE PUMPS Sea Water Pumps, BORNEMANN PUMPS Petrol Pumps, DRAGFLOW PUMPS Sand, Gravel, Mud Pumps, SUNTEC PUMPS Burner Heavy Fuel Pumps, ALLWEILER PUMPS Thermal Oil Pumps.
We can offer the above products and services including on board. If you would like to benefit from our expertise for more detailed information and related topics not included here, contact us. +90 545 734 12 63 Tuzla / Istanbul / Türkiye
品牌
Campbell Scientific
状况
全新
